DV/SDI converter for VideoLink COFDM System




The converter is intended for using in conjunction with the VideoLink COFDM Camera System . It allows to connect DV cameras to the VideoLink. It is possible to use the converter as a stand-alone device also. The DV/SDI converter has IEEE-1394 (FireWire) interface and works with stream embedded stereo audio. 
For connecting to IEEE-1394 there is a 4-pin standard connector. SDI output is BNC connector (2pcs). There is an analogous audio output (TRC connector) also. The converter is controlled by PC via RS-232 interface (9-Pin D-Sub 
Connector ).It is housed in metal case designed to be fixed to the VideoLink COFDM System. The converter is powered from power supply unit (DC 12V) via DC Power Input.



Search in Radiofar

     Archive News:


Company Radiofar together with the DVLab were Exhibitors at the IBC 2012 in the Amsterdam. Photo- report of Exhibition IBC - 2012 you can see here >>


Successful testing on the ground the system of digital broadcasting  DVB-T TV  VIllage for cottage settlements.   Read more.. >>


Company Radiofar together with the DVLab were Exhibitors at Cabsat 2012, in the Dubai. Photo-report of exhibition Cabsat 2012 you can see here >>


Radiofar represents a new generation of transmitters and power amplifiers for the frequency range 2.1-2.7 GHz developed by the Doherty scheme



The Repeater MVDS. The company Radiofar produced repeaters for MVDS systems with frequency range: 10.7-11.5 GHz,   11.7-12.7 GHz,   12.75-13.25 GHz.  Read more... >>


New transmitter MVDS: 12.75-13.25 GHz. The company Radiofar produced the new transmitter for MVDS systems with output powers P1dB=2 W and P1dB=4 W and frequency range 12.75-13.25 GHz.    Look here >>