Amplifier AMP-1/800 for Wireless Camera COFDM system VideoLink-800
The AMP-1/800 is a broadband linear power amplifier of the 800MHz frequency range. The amplifier is intended for using with Wireless Camera COFDM system VideoLink-800 for extension of the VideoLink-800 transmission distance. Design: The AMP-1/800 is designed as a module having input and output RF connectors mounted at top panel and a heat sink mounted at rear panel. Control board with power socket is placed under the heat sink. The front panel is intended for installing adapters for connecting to accumulator or for direct connecting to the VideoLink-800. Built-in automatic gain control system provides nominal value of output signal. The amplifier has input and output signal status indication that allows to make up a conclusion about operational condition of the amplifier and a signal source. he amplifier output is short-circuit protected. Main parameters:
|
Search in Radiofar
Archive News:
27.10.12
Company Radiofar together with the DVLab were Exhibitors at the IBC 2012 in the Amsterdam. Photo- report of Exhibition IBC - 2012 you can see here >>
12.05.12
Successful testing on the ground the system of digital broadcasting DVB-T TV VIllage for cottage settlements. Read more.. >>
14.02.12
Company Radiofar together with the DVLab were Exhibitors at Cabsat 2012, in the Dubai. Photo-report of exhibition Cabsat 2012 you can see here >>
04.02.12
Radiofar represents a new generation of transmitters and power amplifiers for the frequency range 2.1-2.7 GHz developed by the Doherty scheme.
27.01.12
The Repeater MVDS. The company Radiofar produced repeaters for MVDS systems with frequency range: 10.7-11.5 GHz, 11.7-12.7 GHz, 12.75-13.25 GHz. Read more... >>
26.01.12
New transmitter MVDS: 12.75-13.25 GHz. The company Radiofar produced the new transmitter for MVDS systems with output powers P1dB=2 W and P1dB=4 W and frequency range 12.75-13.25 GHz. Look here >>