Amplifier AMP-1/800 for Wireless Camera
COFDM system VideoLink-800
Main parameters:
ã2007ã RadioFar
AMP-1/800
The AMP-1/800 is a broadband linear power amplifier of the 800MHz frequency range.
The amplifier is intended for using with Wireless Camera COFDM system VideoLink-800
for extension of the VideoLink-800 transmission distance.
Design: The AMP-1/800 is designed as a module having input and output
RF connectors mounted at top panel and a heat sink mounted at rear panel.
Control board with power socket is placed under the heat sink. The front
panel is intended for installing adapters for connecting to accumulator or
for direct connecting to the VideoLink-800. Built-in automatic gain control
system provides nominal value of output signal. The amplifier has input
and output signal status indication that allows to make up a conclusion
about operational condition of the amplifier and a signal source.
The amplifier output is short-circuit protected.
Output power for compressions of 1dB 10W
Output effective power 1W
Frequency range 762-818MHz
Gain 16dB
Supported digital modulation QPSK, QAM, COFDM
Input 50 Ohm , N type female connector
Output 50 Ohm , N type female connector
Power Requirement 12V, 1.8A
Weight 1.5kg
Dimensions 225 x 105 x 75
